rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 313 ONLINE 25 EVENTS SEARCH REGISTER  START HERE
 
1 page549 viewsPOST REPLY
CanoMod . Futaba-RC . A Main Hobbies

.
.
Miniature Aircraft Nitro/Gas Helicopters > Best blades
 
 
ChicoNick
Heliman
Location: Chico CA

What blades do you guys recomend for a Fury Expert with a .91? I don't have the long boom. I was thinking the Razor 700's. Sound good?

Nick
04-26-2002 Over year old.
 
 
z11355
rrMaster
Location: 10000 is enough time wasted.

Sounds outstanding!












small problem. They aren't made in 700.
Only 710 and 680
04-26-2002 Over year old.
HOMEPAGE  
 
 
Zxyxx
Senior Heliman
Location: Anaheim

The MA Rotorsport 700 that are $30 cheaper and fly just fine. I can no longer see paying >$100 for blades.
04-27-2002 Over year old.
 
 
ChicoNick
Heliman
Location: Chico CA

The 700's are due out at the end of the month I'm told.


Nick
04-27-2002 Over year old.
 
 
av8er
Senior Heliman
Location: NH, USA

I just broke a pair tonight but they were flying pretty good except for pitching...have the ys80 on fury and standard boom like u. weight is 180. great flips, seemed to be a faster roll rate, the helicopter screamed and auto'd the best i've ever flown. That's what led me to trying to stretch one out that i should have aborted or landed further away. But I did about 8-9 today and it just hung forever......I basically had a good tip over at bottom... no damage except blades and feathering spindle....ouch.

But i had some serious pitching up at full collective in fff, was going faster than the helicopter usually went too. Didn't notice it with my sab 680's. Going to try those tomorrow just to compare, if it happens with those then, maybe I have to pmix some elev out...not sure...any ideas??? running white 3d paddles btw.
04-27-2002 Over year old.
 
 
av8er
Senior Heliman
Location: NH, USA

I think it was an interaction...even though I couldn't see it at paddles. Had some subtrim in there. tried pmixing it out, but that changes (8103) on different flight modes (different max/min outputs of servos). Tried all 4 heavy duty arms (jr). got it pretty close, but not perfect....looks like I'm going to try airtronics(?) wheels and drill my own holes.....
05-03-2002 Over year old.
 
 
1 page549 viewsPOST REPLY
Boca Bearings . Modefo's RC Helicopters . XHELI.COM

.
.
Miniature Aircraft Nitro/Gas Helicopters > Best blades
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Friday, January 9 - 10:55 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie