Waldo
Veteran
Location: Middle of the corn patch (Iowa)
| My aluminum oval links seem to work just fine no binding at all, however the elevator A-arms were to short so I had to remove the ball link and spin a 2mm nut onto the bolt in the A-arm and then screw the ball link back on to adjust it, the 2mm bolt is not threaded into the A-arm and will slide in and out if not held in place with the 2mm nut. The A-arm's also bind on the plastic arm they mount to, I had to do some trimming to get it to operate smoothly. I'm not so sure the plastic originals were as bad as people claim, I recked mine pretty good destroyed a new set of V-blades, several link rod's, one blade grip and a lot more but both oval links and A-arms held up just fine.
[b]Bill[/b] |
