rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 687 ONLINE 46 EVENTS SEARCH REGISTER  START HERE
 
1 page448 viewsPOST REPLY
Futaba-RC . A Main Hobbies . Boca Bearings

.
.
Main Discussion > Airtronics Stylus feature cards \ TJ Setup
 
 
I3DM
rrProfessor
Location: Israel

Hello guys.
2 questions:

1. im trying to setup a TJ Pro with a stylus and i attached the TJ aux to Aux1 on the Rx and assigned the Idle Up switch to control Aux1, but this way i can only get 1 RPM setting for both ID1 and ID2. is there a way to have 2 different ID headspeeds, i.e. 1500 for normal, 1700 for ID1 and 1800 for ID2 ?

2. if you use the HELI feature card with the radio, and want to save a model on the feature MEMORY card - how does it work ? obviously you have to remove the Heli card to push in the Memory card...

thanks!

Team pilot for Radix, Helidirect, Logictech, ThunderPower, Fromeco, Gaui
www.liorzahavi.com
03-03-2004 Over year old.
HOMEPAGE  
 
 
LUNITIC
Senior Heliman
Location: Chesapeake, VA

Stylus Radio

Okay I see what you're trying to do. One thing to note is that you can have over several different Heli Modes with that radio, for different setup. So! decide what you want to do and then program that mode to fit. If you're looking for 2 different RPM settings under the same model you can set the mode as if it was exactly the same but with the only change in Idle up/ RPM.

The Memory card will permit you to save over 50 models and believe me you will need them. I'm up to about 14 and 5 of which is for the same bird but with different fly characteristics. I don't like all the switching because I get confused so I just program the card under different birds to suit what flying I fancy for that time.

It's simple to do:
Enter the menu and go to the last page, you'll see memory card or just card features.
Go into that memu and you'll see Memory card
enter that menu and it will ask to save/delete and whatnots

Remove the Heli card and replace it with the memory card, NOTE: Once the Heli card is done programing the Radio you don't need it in the Radio anymore or until you turn it back on. Back to what I was saying, hit yes for save and then it will ask you where and choose. DO NOT overwrite one of your exsisting slot unless you truely want too. After that remove the memory card and/or replace it with the Heli card and exit. I hope that helps

Tim Richburg Chesapeake,VA
03-04-2004 Over year old.
 
 
I3DM
rrProfessor
Location: Israel

LUNITIC thanks a lot.
is there a way to have 2 diffrent TJ settings without using the ALTERNATE function and 2 models ? i.e for the same model memory (only 1) ?
thanks.

Team pilot for Radix, Helidirect, Logictech, ThunderPower, Fromeco, Gaui
www.liorzahavi.com
03-04-2004 Over year old.
HOMEPAGE  
 
 
I3DM
rrProfessor
Location: Israel

LUNITIC and others, i think i managed to program the 3 headspeed combo. here is how:
- TJ plugged into AUX1. AUX2 is free in the Rx.
- assigned AUX1 to ID1 switch.
- assigned AUX2 to ID2 switch position.
- programmed a mix - AUX 2 master, AUX1 slave for 80%, so that when you switch to ID2, AUX 2 engages, and takes AUX1 down to 80%, which changes the headspeed as AUX1 is the headspeed controller.

what do you guys think ?

Team pilot for Radix, Helidirect, Logictech, ThunderPower, Fromeco, Gaui
www.liorzahavi.com
03-04-2004 Over year old.
HOMEPAGE  
 
 
1 page448 viewsPOST REPLY
Modefo's RC Helicopters . XHELI.COM . Autography FlightPower

.
.
Main Discussion > Airtronics Stylus feature cards \ TJ Setup
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, August 30 - 1:39 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie