thelaw
Heliman
Location: Bay Area
| I have a Phoenix Micro 10 in my Hornet 2 with Razor V2 heli motor. I plugged it in this morning after a flight yesterday and found out that it was not working properly.
When I plugged in my Etech 1200 lipo battery, the servos works properly but there is no response to the motor. I could feel that there is some resistance in the motor so there must be some current. I also noticed that the led is not lighting up either. I could not go into programming mode either. I flew my Hornet 2 several times before with same set up and controller. I also notice the Micro10 was getting warm even with the motor unplug. I tried everything again after I let the controller cooled down but no luck. I tried different batteries (charged up) but no luck too.
I bought the Micro 10 from Aeromicro about 10 days ago from a dealer in CA...
Anyone knows what is going on or wrong?
Thanks |
