rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 430 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
1 page449 viewsPOST REPLY
Gyro Hobbies . E-flite . Next D

.
.
e-Mikado Logo 400 500 600 > Logo 10 linkage setup
 
 
simon109
Key Veteran
Location: Hampshire UK

Hi,

Logo is ready for first flight (almost) set up the linkages for 3d as per manual and the wash out assy is not level ?

My servo's arms are at 90 deg etc, so what should I start with linkage wise, the ones going from servo arms to swash ? but then I will mess up the other linkages and probably have either more or less negative or positive pitch.

Thanks

Simon.
02-15-2004 Over year old.
 
 
nedyah
Senior Heliman
Location: South Australia

Hi Simon,

I started out with the lengths the manual tells you. Then I set the servo arms to 90 degrees and then adjusted the servo arm to swashplate push-rods to what ever they needed to get the swashplate level. The rest of the push-rods didn't need changing from what the manual gave. All I had to do then was set the CCPM percentages etc, and I get approx -11 to +11 degrees.

Cheers, Hayden.
02-16-2004 Over year old.
 
 
simon109
Key Veteran
Location: Hampshire UK

Cheers Hayden.
02-16-2004 Over year old.
 
 
nedyah
Senior Heliman
Location: South Australia

I forgot to mention that I set it up in "idleup 2", at half stick with zero degrees pitch on the blades. From memory I did acctually have to slightly adjust the push-rods (the two long ones that connect to the blade grip mixing arms) to get zero degrees blade pitch.

Cheers, Hayden.
02-16-2004 Over year old.
 
 
poerQwa
Veteran
Location: Rotterdam, The Netherlands

Just work your way up.

Start with servo's 90degrees, logo linkage lengths to start with, swashplate level with 0 degrees rotor pitch(make sure this is true for paddles as well).

Then verify if no binding occurs and if you have satisfied your pitch needs (like -10/0/+10)

Greetz,

Marc
02-16-2004 Over year old.
 
 
1 page449 viewsPOST REPLY
Fast Lad Performance . Ace Hobby . Esprit Model

.
.
e-Mikado Logo 400 500 600 > Logo 10 linkage setup
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, November 22 - 1:21 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie