Darren Bradley
Veteran
Location: UK
| Been chasing a little problem for a few days now , I have developed a vibration in the skids and vertical on the tail fins.
I re looked at the tracking of the blades and both look ok in flight , but installed the lock and set them both at 0 , one was at 2 degrees .
I believe this is done from the front of the machine as stated in the manual and not the sides , as I get different readings.
This means that now , the rod 625 is 95mm and 92mm , does this sound right ?, as I still have the vibration .
Funny thing is , is that if i put them both equal at 95.5mm , the tracking looks out when in flight , but i dont get the vibes......
I have also tried the pulling of the tail belt.
Cheers |
