RunRyder - Climbing rate and spare parts?

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 601 ONLINE 25 EVENTS SEARCH REGISTER START HERE

1 page

407 views

POST REPLY

Midland Helicopters	.	HeliProz	.	ZoomsHobbies
	.		.

Henseleit 3DNT - Rocket - 3DMP > Climbing rate and spare parts?

Bert
Heliman
Location: Slovenia, Europe

1. Can anyone tell me the climbing rate difference in compare to Raptor 50 (I use thunder tiger 3d blades, 1800rpm, +/- 9.5 degres).

2. What spare parts should be ordered immediately?

3. Which parts are tipicaly damaged in light crash and which in heavy crash?

Thaks in advance
Bert

01-13-2004 Over year old.

helifever
Senior Heliman
Location: BE-8750

1 it is not comparable, much faster
2 none
3 wouldn't order before the crash as you don't really know what will be broken, it depends a lot how he comes down and rotor rpm, every time some bearings are broken to, i had a few and yes it's expensive!

helifever

01-13-2004 Over year old.

HOMEPAGE

Bert
Heliman
Location: Slovenia, Europe

Thank you

Sorry for crashes.
Was it because of the "pilot error" or was it because of the technical failure.

I have a Raptor now, as my first heli, for two years and had 7 crashes (3 heavy and 4 light crashes), 6 of them were technical and 1 was even not pilot error but stupidity, by my luck it was very light.

01-14-2004 Over year old.

helifever
Senior Heliman
Location: BE-8750

non of them were pilot errors, all bad luck i guess : i had a paddle version 2003 broken in flight 3/4 went of after 5 min continuous hard flips (must have been damadged before in a crash), another one was a broken main axe in flight, i had 2 due to fail safe, after that i installed a mass wire that unloads the tail belt continuously and didn't had any problems since

greetings,