rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 381 ONLINE 25 EVENTS SEARCH REGISTER  START HERE
 
1 page457 viewsPOST REPLY
MTA Hobbies . Model Rectifier Corp . RCHover

.
.
e-Electric Motors & Controllers > schulze future 11.20e help
 
 
RAPPY1
Heliman
Location: GARLAND, TX

could someone help me on the setup of the future 11.20e setup using a futaba 9c radio? the controller runs the motor but only about 100 rpm. i have raised my throttle points to 100 percent with no effect. the controller arms with the first thottle point at 0 then runs slow. thanks for any help.
12-16-2003 Over year old.
 
 
ufon
Heliman
Location: Prague, Czech Republic

Probably your controller settings are wrong. Check your settings accordingly. For best performance and correct functionality you have to set some internal controller values such us:

- set heli mode
- set correct switching frequency for your motor e.g. 9kHz (see motor requirements or schulze http://www.schulze-elektronik-gmbh....de/gswit-de.pdf for a guide)
- set correct timing mode e.g.18 degrees

These settings are mandatory and have to be set precisely while they have direct impact on how your controller and motor run together.
12-18-2003 Over year old.
HOMEPAGE  
 
 
1 page457 viewsPOST REPLY
RC-Direct . HeliDirect . PowerHelis

.
.
e-Electric Motors & Controllers > schulze future 11.20e help
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Friday, January 9 - 7:15 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie