RunRyder - Tail mounted rudder servo

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 435 ONLINE 42 EVENTS SEARCH REGISTER START HERE

1 page

1236 views

POST REPLY

GrandRC	.	CanoMod	.	Futaba-RC
	.		.

After Market Accessories > Tail mounted rudder servo

crosby
Heliman
Location: Iowa City, Iowa

Has anybody had trouble with the T/R pushrod hitting the boom supports? I got a new tail mount for my rudder servo, but the pushrod rubs along the boom support.

Remember; It always seems darkest before going totally black.

04-05-2002 Over year old.

Doug
Elite Veteran
Location: Naples Florida....

You can change the orientation of the Servo and/or use the "lower" quadrant of the servo wheel. Either method should give you plenty of clearance

04-05-2002 Over year old.

crashkit
Heliman
Location: Ohio

i had a similiar problem with my raptor 30 machine i ended up having to space out the one boom support with 2 small washers and rotating the mounted servo just a wee bit........... no more contact

04-05-2002 Over year old.

shaggy
Senior Heliman
Location: USA

Ran into the same problem with my Raptor 50. Just had to rotate the servo mount a little so it is at a slight angle and that gave me enough clearance. Hope this helps,

Brooks

04-05-2002 Over year old.

crosby
Heliman
Location: Iowa City, Iowa

Thanks guys, I knew there was a simple fix.

Remember; It always seems darkest before going totally black.

04-05-2002 Over year old.

Stet
Elite Veteran
Location: Long Beach CA

Add spacers

I added a couple 4 mm spacers between the fin mount and the boom struts. Problem solved. I used longer 3mm bolts to cover the extra span. Looks neat too.

04-10-2002 Over year old.

1 page

1236 views

POST REPLY

A Main Hobbies	.	Boca Bearings	.	Modefo's RC Helicopters
	.		.

After Market Accessories > Tail mounted rudder servo

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic