dwaynet
Senior Heliman
Location: Fairfax, Virginia
| Just a thought, if you want to try it. I have been using the below setup for a year on my 30 and that is exactly how I did my 50 as well.
I used the existing pushrod/guides/coupler from the kit. I mounted the servo, cut the front rod down to 4 inches long, screw on a ball link and attach it to the servo. Then just snip your back rod down to the correct length to go into the coupler/4" piece. I loctited the crap out of that coupler and I'm only using 2 of the rod guides now, not 3. After initially flying it and looking at it I made a slight S bend in the 4 inch piece to line up better, but other than that it's worked great for a year.
Dwayne |
