RunRyder - Freya/Xpec Hardware kits 4 Sale!!!

RR Rated M For Mature

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 257 ONLINE 50 EVENTS SEARCH REGISTER START HERE

4 pages [ << < ( 1 ) 2 3 NEXT >> ]

9313 views

POST REPLY

CarbonXtreme	.	Midland Helicopters	.	HeliProz
	.		.

HIROBO Turbulence - SDX - Freya - Sceadu > Freya/Xpec Hardware kits 4 Sale!!!

Dazzler
Elite Veteran
Location: Ohio

I now have more kits available, for those that dont know these bolts will replace the phillips head upper/lower frame bolts included with the Freya, and Xpec with SHCS(Socket Head Cap Screws), and it also contains M4 button head bolts for the main rotor head, and engine mount bolts which should be replaced every now and then. The bolts are 12.9 alloy steel!!!

Here's what you get:
30 pcs. M3X15MM SHCS
20 pcs. M3X35MM SHCS
20 pcs. M4X14MM SHCS
25 pcs. M3 Locknut

Total $14.75 shipped, will accept paypal
Money Orders are accepted as well(PM me for address)
USA Ship Only!!!
Paypal to: ELWASH@MSN.COM
Thanks, Daz...

12-12-2003 Over year old.

HOMEPAGE

Dazzler
Elite Veteran
Location: Ohio

Canada shipping available also, PM for more information!!!

Daz...

12-12-2003 Over year old.

HOMEPAGE

Dazzler
Elite Veteran
Location: Ohio

In2helis

The Xpec uses socket heads for the M3X15 for lower frame, however the M3X32 for upper frame are still phillips head bolts, so with this kit you can change those out, and have the M3X15 as backup. The Std Freya uses all phillips, and this kit will change them all out to SHCS.

Daz...

12-12-2003 Over year old.

HOMEPAGE

Dazzler
Elite Veteran
Location: Ohio

Will ship them out tomorrow for you!!!
Thanks, Daz...

12-12-2003 Over year old.

HOMEPAGE

Dazzler
Elite Veteran
Location: Ohio

In2helis-paypal received

Going out tomorrow!!!

Still have more kits available.

Daz...

12-12-2003 Over year old.

HOMEPAGE

Blaze
Senior Heliman
Location: Los Angeles, CA

Hey Daz

It has been a while, but I bought a standard Freya 2 months ago and it is now a X-spec without the decals and carbon frames (I have the frames but want to use the stock ones for a while). If you can confirm that you still have kits left let me know and I will take one.

Thanks Buddy,
Blaze

Also, memo to everyone, if you are trying to decide on the standard Freya over the X-Spec, pay the extra money and get the X-Spec, I bought the standard and converted it piece by piece over three weeks and it cost me around $200.00 more than if I was to just buy the X kit. But the flip side is I have alot of spare parts if and when that gravity catches up with me!!!!

You can`t beat a Hirobo!!!!!!!!!

12-13-2003 Over year old.

Dazzler
Elite Veteran
Location: Ohio

Blaze PN sent

Yes they are still available!!!

Daz...

12-13-2003 Over year old.

HOMEPAGE

MHawker
Heliman
Location: San Diego, CA

Got my hardware set today, Daz'.

Thanks!

12-15-2003 Over year old.

Dazzler
Elite Veteran
Location: Ohio

No problem Mhawker

Thanks for letting me know. That was quick, with all the Christmas shipping I thought it would have taken longer.

You will like this upgrade!!

Daz...

12-15-2003 Over year old.

HOMEPAGE

WEAVERS32
Heliman
Location: WALNUTPORT PA

HARDWARE KITS

DAZZLER-THANKS AGAIN FOR THE HARDWARE KITS! REDID ALL MY FREYA'S THIS SNOWY WEEKEND ,NO MORE STRIPPED HEADS.....HAPPY FREYAS AGAIN.

12-15-2003 Over year old.

z11355
rrMaster
Location: 10000 is enough time wasted.

daz, you should make up Evo kits too.

12-15-2003 Over year old.

HOMEPAGE

Dazzler
Elite Veteran
Location: Ohio

Weaver, glad you got those bolts changed out, doesnt take long to do, and a great job for a snowy day, even though it probably only takes an hour if that to do. Enjoy!!!

Z, I would make them up specifically for the EVO/Sceadu too, however I dont really know which bolts are required for the EVO since I dont own one yet, if you could post a desired pkg(thread and length) and qty needed, I can put up a $ for an EVO hardware set, naturally at a good price too.

I have had a couple purchase the Freya hardware set to use on the Sceadu/EVO but your right it would probably be better for the EVO to have its own hardware set.

Daz...

12-15-2003 Over year old.

HOMEPAGE

z11355
rrMaster
Location: 10000 is enough time wasted.

if memory serves.....

15 M3x35 SCHS
15 M3 locknuts
7 M2.6x12 SCHS
7 M2.6 locknuts

(the 2.6's are for the tailbox)

12-15-2003 Over year old.

HOMEPAGE

Dazzler
Elite Veteran
Location: Ohio

doesnt the Sceadu use any M3X15 SHCS, and what about the engine mount bolts and main rotor bolts, those are usually nice to have a few extra of.

Let me know, and I will make a post for Sceadu/EVO hardware set, and see how it goes.

Thanks, Daz...

12-15-2003 Over year old.

HOMEPAGE

z11355
rrMaster
Location: 10000 is enough time wasted.

I'll have to look and double check.

It's not that the Evo doesn't use any
SHCSs, it's just the frame screws
and tailbox screws are Phillips.

The engine mount screws are SHCSs
already.

12-15-2003 Over year old.

HOMEPAGE

Dazzler
Elite Veteran
Location: Ohio

Ok Z let me know, the more bolts that are needed to be replaced the better the price I can get them all down to. I just checked on the M2.6 and that is one expensive little bolt, but I think I can get them down. I'm still checking on the M2.6 locknuts those seem like a rare size in a locknut, but worse case scenario EVO users will just have to stick with the non locknut type that come with the kit, the main thing is to get the socket style bolts.

Daz...

12-15-2003 Over year old.

HOMEPAGE

Kinger
Elite Veteran
Location: Columbus, OH

Hey Daz,

Got my Freya bolt kit today. Thanks! Guess I should have waited for you to put together that Evo kit instead of buying the Freya one

Oh well.......

Take care,

Mike

12-15-2003 Over year old.

Dazzler
Elite Veteran
Location: Ohio

No problem Schuie

Sent you PM on EVO kit!!!

Daz...

12-15-2003 Over year old.

HOMEPAGE

Dazzler
Elite Veteran
Location: Ohio

Quote
What's the deal with the EVO kit?

Nothing yet, looking into it to see if I can supply a hardware kit for the EVO. Will know more later this week!!!!

If any of you guys want something in the kit other than what Z11355 has posted, let me know as soon as you can.

Thanks, Daz...

12-16-2003 Over year old.

HOMEPAGE

Blair
Key Veteran
Location: Republic of Canuckistan

You say you'll ship to the US only.

Why not to Canada?

Blair

12-16-2003 Over year old.

4 pages [ << < ( 1 ) 2 3 NEXT >> ]

9313 views

POST REPLY

HeliHobby	.	Ron’s HeliProz South	.	MTA Hobbies
	.		.

HIROBO Turbulence - SDX - Freya - Sceadu > Freya/Xpec Hardware kits 4 Sale!!!

PRINT TOPIC

Advertisers

Subscribe to This Topic