rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 836 ONLINE 21 EVENTS SEARCH REGISTER  START HERE
 
1 page452 viewsPOST REPLY
RCHover . RC-Direct . HeliDirect

.
.
e-Mikado Logo 400 500 600 > Has any one tried a logo 10 with a brushed motor?
 
 
50feet
Key Veteran
Location: Wilmington, Delaware

The manual says you can use either brushed or brushless. I have only heard or seen BL setups but if the corona, eco. venture and concept all fly with a brushed motor im sure the logo will too.

To trust no one is to trust everyone equally
12-08-2003 Over year old.
 
 
Saint728
Elite Veteran
Location: Sydney Australia Sponsored by: Quick UK

I'm sure you can fly a Logo 10 with a brushed motor, but I don't think anyone wants to go this route because you won't get the same performance that you will find in a brushless motor. Also your batteries won't last as long or give you as much power as you would find in a brushless set up. Brushless motors and ESC's are only a little more expensive then the brushed version.

Take Care,
Cheers, Patrick
12-09-2003 Over year old.
HOMEPAGE  
 
 
rcman
Veteran
Location: Logan, Utah

No but I tried a JR Voyager E on the stock brushed motor that comes with the kit and after 10 flight you have to put in a new pair of burshes ($14.95 per pair)
After a while of flying that way you will soon see that brushless is cheaper in the long run and much better preformance
David
12-09-2003 Over year old.
 
 
1 page452 viewsPOST REPLY
Heli Wholesaler . 3D Heli Depot . JR-Spektrum

.
.
e-Mikado Logo 400 500 600 > Has any one tried a logo 10 with a brushed motor?
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, December 4 - 11:10 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie