RunRyder - Voyager E & 9C setup help....

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 688 ONLINE 46 EVENTS SEARCH REGISTER START HERE

1 page

903 views

POST REPLY

MaxAmps.com	.	HeliDirect	.	PowerHelis
	.		.

e-JR Voyager E > Voyager E & 9C setup help....

HoverPuss
Senior Heliman
Location: Bellevue, NE

I have a JR Voyager E and a Futaba 9C radio. I tried to setup the radio like the directions say but with using their servo reversing, it doesn't work out. Can anyone who flys a Voyager E with a 9C give me their set-up. I need which swash plate you are using, servo reversing, and anything else you got. I have a raptor and can do basic set-up, but this CCM is new to me. I think I had it set-up but then fond some stuff in the directions for reversing and screwed it back up. So, what kind of set-up do you have? Thanks in advance for the help....

HP

11-29-2003 Over year old.

KnimRod
Senior Heliman
Location: Central Michigan

My Voyager E / Futaba 9C Setup:

Reversing:
1: AIL - Nor
2: ELE - Nor
3: THR - Rev
4: RUD - Rev
5: GYR - Rev
6: PIT - Rev

Swash: HELI (SR-3)
Swash Rates:
AIL +60
ELE -60
PIT +50

I run in governor mode so my throttle curves are flat. My pitch curves are pretty standard but I have some mods done to the head so they probably won't help you much. Good luck!

Lance

11-29-2003 Over year old.

HOMEPAGE

Hoagie1
Veteran
Location: Redmond, WA

You guys should post your rx and servos

JR and Futaba seem to go the opposite directions...

The key thing to keep in mind that swash should tilt in the direction of your cyclic stic. If it isn't you'll need to reverse your servo or change the swash AFR from plus to minus or vice versa, until the swash tilts in the direction of your cyclics. This is assuming you have the correct swash type set.

-Andy

11-30-2003 Over year old.

HOMEPAGE

HoverPuss
Senior Heliman
Location: Bellevue, NE

Thanks for the help KnimRod....I understood the theory behind the set-up, and I guess I could have just kept playing with it until I got it right. Now on the other hand I have three other nitro helis to work on, so I just thought it would be better to learn by asking for help (which is what I thought this board is for) then wasting my time screwing with it....

HP

11-30-2003 Over year old.

KnimRod
Senior Heliman
Location: Central Michigan

Not a problem... You're welcome. I understood your situation perfectly because I was there once not too long ago.

Lance

11-30-2003 Over year old.

HOMEPAGE

1 page

903 views

POST REPLY

JR-Spektrum	.	Gyro Hobbies	.	E-flite
	.		.

e-JR Voyager E > Voyager E & 9C setup help....

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic