rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 821 ONLINE 21 EVENTS SEARCH REGISTER  START HERE
 
1 page743 viewsPOST REPLY
Mikado Modellhubschrauber . GrandRC . CanoMod

.
.
Miniature Aircraft Nitro/Gas Helicopters > Running Servo Wires on the Fury
 
 
swashead
Heliman
Location: Austin, TX

I was wondering whether most people ran their servo wires between the frames. This seems to be the most logical way to do it but MA supplies the wire holders that slip on the bolts to run them on the outside of the frame.
04-01-2002 Over year old.
 
 
basmntdweller
Senior Heliman
Location: Indianapolis IN

I'm waiting to see what everybody else has done! Mine is all together except dressing the servo wires, fitting the canopy and final radio setup.
later,,,basmntdweller


Stupid people have no idea how stupid they are!!!
04-01-2002 Over year old.
 
 
gnichola
Senior Heliman
Location: Santa Rosa, CA. USA

To avoid the problems I have seen others have with wires hitting the clutch bell or start shaft, I turned all my servos around so that the wires came straight forward. Much cleaner and basically zero chance of hitting something.

Later, Guy
04-02-2002 Over year old.
HOMEPAGE  
 
 
XLFLYER
Senior Heliman
Location: Denver, Colorado

Here is another idea! Where the two vertical frames meet the radio tray put fuel tube over the front of the frames to prevent the wires from being cut when the wires are routed between the frames. (Cut the tube to length and cut down one side of the turbe and press on) I hope this is clear if not email me.
04-03-2002 Over year old.
 
 
av8er
Senior Heliman
Location: NH, USA

yup x...i did the same thing slice the fuel tubing and a little ca to hold it in place. if ur looking for detail, some hobby stores sell a u-channel that looks nice.....but do something, i had a couple servos with the wires chewed threw....could have been bad......
04-03-2002 Over year old.
 
 
JasonM
Senior Heliman
Location: usa

JUST DEBUR EDGES

Use a small file debur all edge!!!
04-04-2002 Over year old.
 
 
1 page743 viewsPOST REPLY
Futaba-RC . A Main Hobbies . Boca Bearings

.
.
Miniature Aircraft Nitro/Gas Helicopters > Running Servo Wires on the Fury
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, December 4 - 11:00 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie