JestRR
Senior Heliman
Location: Florence, Oregon
| the new plug materialI found some different foem material from DOW. its pink, R-5 Extruded polystyrene Insulation. They are useing it around here for foundation insulation. I'm using "3M Super 77 Spray Adhesive" It seems to be hoding very well and the seams dont pose any hard spots like the "Beats Nails" I used on the other foil faced insulation. I ran out of spray tonight, so i have to get the rest of the sheets glued up tomarow and I can start carving the new plug tomarow night. the new insulation doesnt sand down as fast as the other and its doesnt make as big a mess. I jsut hope that the fiberglass or epoxy resine doesnt eat it away. I'll keep you all up dated as useuall!!
MikeCool:
Mike Spinner
Florence OR
NORTHWEST AERIALS/ SCALEWORKS |
I got it all glued up and started carving it on Sunday. Its much less dusty and there is not as hard of a hard line where the seams are. Its just gong to take a little longer to get it to the basic shape as I'm only going to use my dremmil to get it there. Not try to cut the big chunks off with a had saw or try it with a hot knife.( to smokey!!) And it seems to to sand fairly well too but thats in a few days before i get to that stage.
