ufon
Heliman
Location: Prague, Czech Republic
| Well as almost with any eletric brusless/sensorless motor you can connect/exchange all 3 wires as you like. The best practice is to solder wires with the same color e.g. MOTOR red->ESC red; in case all 3 have same collor or not matching just temp.connect them as you like.
Then just try to start your motor and check the direction how motor rotates.
If it is moving to wrong direction then you have two possibilities how to reverse the direction:
1/ If your ESC has an option to revert the direction just change it there
2/ if not then just exchange any two wires between motor and ESC and connect them again |
