I want to change the pinion on my clutch bell from 10 to 11 tooth so that I can run a .91 size motor. How do I remove the pinion? Does it thread in or is it pressed, or can it come apart at all?
z11355 rrMaster Location: 10000 is enough time wasted.
it threads.
It's Loctited but all you need to do is
put a rag around the pinion and get set of
well fitting pliers for the pinion and unscrew it.
91 users are using either 95/12 or 93/11 ratios.
Get the delrin gear in either case. The
11T pinion is 414212 for about $37. The
Delrin gears are about $33
