rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 694 ONLINE 26 EVENTS SEARCH REGISTER  START HERE
 
1 page430 viewsPOST REPLY
A Main Hobbies . Boca Bearings . Modefo's RC Helicopters

.
.
Gasser Model RC Helicopters > bergen/minature measurement
 
 
traderdave2
Veteran
Location: Covington, GA

Does anyone have the center to center distance of the mainshaft to starting shaft on a intrepid or x-cell gasser? Also, does anyone know what the pinion and main gear tooth count is on the Hirobo eagle gasser?

Thanks,
Harlan
08-11-2003 Over year old.
 
 
Billme
Key Veteran
Location: MS

Harlen,
What in the world are you up to? I know your up to something, hehee
I'll look at my heli in the morning, and tell you..
Bill
08-11-2003 Over year old.
 
 
traderdave2
Veteran
Location: Covington, GA

Bill,

Just wondering if something will work. Are you going to IRCHA?


Also, gasser guys and gals. I would also settle for the pinion and main gear OD.


Harlan
08-12-2003 Over year old.
 
 
ImRich
Veteran
Location: Derry, NH USA

The rough distance between the main and clutch shaft is about 52mm (I didn't disassemble my heli to get an accurate measurement, sorry).

The main shaft is 10mm, the clutch shaft is 6mm.

There is no starter shaft on the gasser, it's a pull start!

The clutch pinion gear is about 16mm.

The main gear is about 93mm.

I hope this helps somehow.

What are you doing?

---
Rich
08-14-2003 Over year old.
HOMEPAGE  
 
 
Lawso
Heliman
Location: Sydney Australia

Measurements and ratios

The distance between the start shaft and the main shaft on my bergen and my x-cell are both approx 53mm.
Both have 14 tooth pinions and 90 tooth main gears.
My X-Cell has bergen frames and clutch/fan assy. Not sure if that makes a difference.

Lawso
08-14-2003 Over year old.
HOMEPAGE  
 
 
1 page430 viewsPOST REPLY
XHELI.COM . Autography FlightPower . Advantage Hobby

.
.
Gasser Model RC Helicopters > bergen/minature measurement
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, January 10 - 12:29 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie