tadawson
Key Veteran
Location: Lewisville, TX
| kirrajas -
Regarding your last question, I am not sure what you mean by the "aux 3" page reference. When in the page for code 44, you can set code 44 to respond either to flight modes or to aux-3. Is this what you refer to? If so, you are correct, this will give you selection of rates 0 and 1 from the rudder d/r switch, which is the way I run. You cannot access rate 2 this way. For those who want to "tweak" the gain, I don't see any reason that the basic setup could not still work this way, and run a mix from aux 4 or aux 5 to "tweak" the gain in flight.
- Tim |
