rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 695 ONLINE 26 EVENTS SEARCH REGISTER  START HERE
 
1 page494 viewsPOST REPLY
PowerHelis . Heli Wholesaler . 3D Heli Depot

.
.
e-Century Hummingbird - Swift > Hummingboard question
 
 
Airmicro
Senior Heliman
Location: Roanoke, Va

Just got my Hummingbird and am mounting everything. I'm putting the receiver where they say, but the lead coming out of the Hummingboard is way too short to reach over to the receiver. Whats everyone done here?

Hummingbird V2
Razor V2
Phoenix 10
EDF40H tail
Trec tail esc
TP 1320 3s
08-05-2003 Over year old.
HOMEPAGE  
 
 
jake7030
Heliman
Location: Arizona

Hi, I tried emailing you but it seems you have requested not to recieve mail. Im sorry to go off the subject. but where did you purchase your kit and did you get the upgraded motor with the kit

Thanks,

And have you tried an extention on the leads.
08-05-2003 Over year old.
 
 
parkguy
Senior Heliman
Location: San Diego CA

setup

the best basick setup if your going with stock gear is to put the gyro on the front the hummingboard on the side witht he removeable panel and the rec on on the side with the servos..

if you need a picture of how to do It I have a couple on my site.

www.electricmicro.com
08-05-2003 Over year old.
HOMEPAGE  
 
 
Airmicro
Senior Heliman
Location: Roanoke, Va

Yeah I went to your site several times today, but it isn't showing any links to click on today for some reason. I knew you had pics of different set-ups there, but can't get them to come up today.
I do have the Gyro on the front like they say, and the receiver over with the servo's, but the lead coming out of the mixer is way to short to reach over to the receiver.

Hummingbird V2
Razor V2
Phoenix 10
EDF40H tail
Trec tail esc
TP 1320 3s
08-05-2003 Over year old.
HOMEPAGE  
 
 
parkguy
Senior Heliman
Location: San Diego CA

Help is on the way

Hold on let me post a couple pictures here so you can get a good basic setup
08-05-2003 Over year old.
HOMEPAGE  
 
 
parkguy
Senior Heliman
Location: San Diego CA

Ok here is a good basic setup

Ok guys here is a good basic setup with all stock gear and the gyro in the back..

all you need is a little double sided tape and your good to go I use the foam type also take the shock out..







I hope that is right..
08-05-2003 Over year old.
HOMEPAGE  
 
 
Airmicro
Senior Heliman
Location: Roanoke, Va

Thanks for the pics! The wire coming out of the Hummingboard to go over to the rx is very short, it won't reach over to the receiver! THe wire coming out of the hummingboard to go to the Gyro is long, so no problem there. The other wire coming out of the Hummingboard that goes to the throttle, is way shorter than the gyro wire! I put a servo extension on it, but didn't want to do that really because they are usually a little too long.

Hummingbird V2
Razor V2
Phoenix 10
EDF40H tail
Trec tail esc
TP 1320 3s
08-06-2003 Over year old.
HOMEPAGE  
 
 
1 page494 viewsPOST REPLY
JR-Spektrum . Gyro Hobbies . E-flite

.
.
e-Century Hummingbird - Swift > Hummingboard question
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, January 10 - 12:48 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie