RunRyder - Raptor 50 kit

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 730 ONLINE 26 EVENTS SEARCH REGISTER START HERE

1 page

503 views

POST REPLY

Esprit Model	.	Thunder Power RC	.	Mikado Modellhubschrauber
	.		.

Thunder Tiger Raptors 30-90 - Imperio > Raptor 50 kit

Helimark
Heliman
Location: Escondido, Ca

I found that the50 full kit contained a solid pin for the tail shaft gear, the instructions and my 30 have a roll pin. I didn't feel comfortable using the solid pin. Anyone find this in their kit?

03-05-2002 Over year old.

djandyling
Senior Heliman
Location: Northwest, England, UK

Hi

My R50 kit also had a solid pin, but you also get a grub screw that screws into the end of the tail shaft to secure the pin from moving. The instructions do not show this.

Andy

03-05-2002 Over year old.

HelicopterJohn
Key Veteran
Location: Seffner, Florida (Just East of Tampa, Florida)

Let us know how the Raptor 50 Flies. What engine do you have installed?

OC Bob's Gathering #2 was a Premiere Event. Pictures in my Gallery

03-05-2002 Over year old.

HOMEPAGE

djandyling
Senior Heliman
Location: Northwest, England, UK

I have installed a Webra 52 AAR engine into my R50, which should provide plenty power. I will be starting her up this weekend, after I fit the pipe and manifold. I wanted to use the stock muffler but the mounting holes on the Webra did not line up, so I have purchased a Hatori 60 sized manifold and a Hatori 54 pipe.

Generally I think the R50 kit is good value for money?.

Andy

03-05-2002 Over year old.

Helimark
Heliman
Location: Escondido, Ca

Tail Shaft

Thanks, now I notice the threaded hole on the tail shaft. I ended up pulling the pin and replacing it with the roll pin. I'll wait until a repair and start using the grub screw.

03-05-2002 Over year old.

1 page

503 views

POST REPLY

GrandRC	.	Futaba-RC	.	A Main Hobbies
	.		.

Thunder Tiger Raptors 30-90 - Imperio > Raptor 50 kit

PRINT TOPIC

Advertisers

Subscribe to This Topic