parkguy
Senior Heliman
Location: San Diego CA
| Ok I got my 2-cell lipo pack today and After looking at others I decided to make a mount for the battery that would use the hardware that was allready on the bird so here is what I came up with.
1. take the front birdseed battery off and flip it over with the hook at the top, and slid it on to the 2 rails, hold them inplace witht he little rubber stoppers.
2. pull the back birdseed as far forward as it will slid and move the rubber stoppers forward to hold it in place.
3. Next take a medium ziptie and wrap it around the too post and snug it around the battery ( see picture below not too tight just enough to hold the pack.
4. now the neat part clip a rubberband on the bottom clip over the front of the pack and hook tot he top clip. your done..
Picture below from Electricmicro.com
 |
