rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 741 ONLINE 26 EVENTS SEARCH REGISTER  START HERE
 
1 page292 viewsPOST REPLY
XHELI.COM . Autography FlightPower . Advantage Hobby

.
.
JR Heli Vibe - Airskipper - Sylphide - Venture > optional mixing arm on cs???
 
 
jesse
Senior Heliman
Location: Houston, TX.

I'm having trouble making this work, has anyone made this work with the plastic head?? A guy at my feild has it but i didn't get a good look ay it
07-18-2003 Over year old.
 
 
3DPP
Senior Heliman
Location: Vienna/Austria

I have them inside.
Everyone mixing arm has two different side, put in the screw from the short side.
07-18-2003 Over year old.
HOMEPAGE  
 
 
Secret Squirrel
Key Veteran
Location: New Zealander living in Melbourne, Australia

And then you'll find that it knocks on the flybar control arm too.

I fitted mine last night, I got them to work by putting a couple of washers between the flybar rocker and the arm, this pushed it out a bit more to clear the flybar arm. I put a slightly longer bolt in to compensate.

All in all the arms are pretty crap in quality, especially when compared to a CS.

Si

-------------
Simon Lockington
07-18-2003 Over year old.
HOMEPAGE  
 
 
Ergodude
Lost Senior Heliman
Last time on RR
10/30/2003 5:20PM
Location: Hou TX

This is the same problem that the ergo60 has, if take a close look at he arm you will notice that the short end is has an off set( look straight down the arm ). Flip arm around and put the balls on the other side this should solve the problem. Jesse I tried to tell Dennis this on his but I guess he didn't understand what I was saying, If you would like I can bring my ergo 60 head out and show you what I have.
07-19-2003 Over year old.
 
 
jesse
Senior Heliman
Location: Houston, TX.

Ron is that you? IIf it is give mme a call, Ihear what your saying but the arm is only thinner on the long side not the side that connects to the swash plate
07-20-2003 Over year old.
 
 
Ergodude
Lost Senior Heliman
Last time on RR
10/30/2003 5:20PM
Location: Hou TX

I spoke with jesse, this may not fix the problem. The arms don't appear to be the same. Anyway I'll look at Dennis' heli tomorrow and see how it is set up.
07-20-2003 Over year old.
 
 
1 page292 viewsPOST REPLY
Revolution Models . CarbonXtreme . Midland Helicopters

.
.
JR Heli Vibe - Airskipper - Sylphide - Venture > optional mixing arm on cs???
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, January 10 - 3:16 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie