rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 715 ONLINE 42 EVENTS SEARCH REGISTER  START HERE
 
398 pages [ <<    <     6      7     ( 8 )     9      10     NEXT    >> ]162115 viewsPOST REPLY
HeliProz . ZoomsHobbies . HeliHobby

.
.
Clubs and Associations > orange county, ny ??
 
 
AJT
Veteran
Location: KINGSTON, NY

"not me!" and "never, ever
Whoooooooooooooooo are u talking about LOL
10-15-2003 Over year old.
 
 
manzer74
Key Veteran
Location: Marlboro, NY

well put azzir,
sar the receiver connection looks just like a co-axial cable connection. lets give it a shot nothing to loose only to gain. ill take apart the camera and see what is involved in replacing the transmitter antenna. just have to solder a new one in. i guess i should try radio shack for that wire, do you think its something special?

Make sure you get all the pieces...
10-15-2003 Over year old.
 
 
Sar
Elite Veteran
Location: Kingston, NY

Quote 
sar the receiver connection looks just like a co-axial cable connection. lets give it a shot nothing to loose only to gain.


Gain hehe, good pun. I have one directional antenna with over 15dB gain, but it's built for 900Mhz and these systems are advertised as 900 to 1200, we'll see what happens.
Probably not special wire, I would just measure the wire length between the case and the end of what is already on there, then cut one from thin stranded wire (I have tons and can bring a soldering iron with me) maybe 1 inch longer than what you measured(to make up for how much wire is in the camera case) and solder it onto the end of the existing antenna. Trim it back slowly to fine tune if needed.

--
Jon
10-16-2003 Over year old.
HOMEPAGE  
 
 
manzer74
Key Veteran
Location: Marlboro, NY

sounds fine to me, lets try to do it this weekend sometime.
im breaking mine down tonight to get ready for rebuild...hope i dont find anything additional i will need...

Make sure you get all the pieces...
10-16-2003 Over year old.
 
 
jack33
Veteran
Location: USA Wallkill, New York

HI AJT,

i will be over to new paltz sunday morning,any guys here inthis thread,i have 3 sets of 550mm woodies (free) if anyone needs them, they havt to be covered.let me know ill bring them with me sunday,i upgraded the venture 30 to an os50,so i had to change the head and put a longer tail tube and 600mm blades on it, thanx for hooking me up with the tt600mm carbon blades UAI
10-16-2003 Over year old.
HOMEPAGE  
 
 
`3D
Senior Heliman
Location: north east

Missed this NY thread..I'm near Albany...got about 6 or 7 in my club that fly....few more close by.....a few in Mass near Barnspeed hobbies (Joe's got everything for heli)...Joe is a great flyier...his buddy Jason is the best....should get together sometime.

*****Burn fuel...it takes time to train your brain*****
10-16-2003 Over year old.
 
 
Frequency47
Veteran
Location: Port Ewen, NY

I agree

Joe (BarnSpeed Hobbies) has always been there for me when I trek up there to Lee, Mass from Kingston. I have not seen him fly, but beeing in the buis, how could he not be a good flyer. We are always happy to see other clubs and like to visit others as well. I am still waiting to meet the gent from Rotory Aerials, he is known to fly a Maxi Joker.

CEO Sub-Terrainian Aircraft Development Corp.
10-16-2003 Over year old.
 
 
pshooter2
Heliman
Location: Hudson Valley, NY

Azzir

I still say throw it in the trash and run like hell before it's too late
10-16-2003 Over year old.
 
 
AJT
Veteran
Location: KINGSTON, NY

Peeeeeeeeeeeeeeeeeeeeeeeeteeeeeeeeeeee
O my, You actually Posted!!
10-16-2003 Over year old.
 
 
azzir
Key Veteran
Location: Ulster County, NY

How can I???

Woooeee! Pete! Glad to have a little something from you. How can I trash my lovely Nexus now that Mike got it all tuned up and flying right? Where you been bro? The field ain't the same without your pretty face. LMAO! I think it's too late already.
Rick
10-16-2003 Over year old.
 
 
AJT
Veteran
Location: KINGSTON, NY

LMFAO
10-16-2003 Over year old.
 
 
AJT
Veteran
Location: KINGSTON, NY

who's flying sunday? Mike if your HELI isn't ready you can fly mine as much as you feel like. Maybe you can set( idle up curves) and try them out? I also think it's time too lean the motor out a little more. Give it some thought. I'll have the carbons in the jeep try them also. De plank ED De plank. JON I ordered two battery packs from DURALITE for the wing. They said they well ship them in NOVEMBER. COMBATIS URASSIS!!!. O GOD I need help.
AL
10-17-2003 Over year old.
 
 
manzer74
Key Veteran
Location: Marlboro, NY

Big Brown (ups) should have my parts here today ill pick them up from uai tonight and get to work, i dont understand it took me 2 days to build this thing and hour and half to strip it apart..?? as long as everyhting comes in i just may be back for sunday, we'll see. Ajt i'll still take you up on your offer and fly your raptor, and if i end up with a 50 just know i'm gonna blame you !...hehe but thanks

hopefully we can have a good turn out. Sar bring that antenna and we'll try it out. maybe over the winter i'll invest in a good wireless video cam to play around with. ((we should fly it with the cam around new paltz campus..lol) would definatly get some good pics at the dorms...
how are you making out with freq's raptor maybe with the new motor we can get it to fly this weekend with no problems.

Make sure you get all the pieces...
10-17-2003 Over year old.
 
 
manzer74
Key Veteran
Location: Marlboro, NY

Sar, Frequency, Gimme a call i have your stuff....

Make sure you get all the pieces...
10-17-2003 Over year old.
 
 
jack33
Veteran
Location: USA Wallkill, New York

ill be at new paltz on sunday in the am
10-17-2003 Over year old.
HOMEPAGE  
 
 
Sar
Elite Veteran
Location: Kingston, NY

Whooo Al, combat combat combat.. looking forward to it in.. NOVEMBER!?

Cool think Mike, maybe get together with you, got enough room to for the rebuild of another R30 there as well?

Count me in for Sunday!

--
Jon
10-18-2003 Over year old.
HOMEPAGE  
 
 
manzer74
Key Veteran
Location: Marlboro, NY

Sar, i'll be home about 1:30 tomorrow we can setup something in the garage. a big work table or something. let me know if you want to come down. i just got back with the box from rob and i'm ready to go.

you can gimme a call or shoot an e-mail

Make sure you get all the pieces...
10-18-2003 Over year old.
 
 
APACHE AH-64A/D
Heliman
Location: The Hudson Valley

PShooter.................... Thanks!!! Your the Best!

Thanks Pete for taking the time and effort in explaining to me all the fine details on RC Helicopters. Your vast knowledge and experience has help me enormously. As we speak frequently about me getting into RC Helicopters I know your guidance will point me in the right direction. I look forward to flying with you at the beautiful fields in Saugerties.

PS..... Would love to get the Heli with the Jet Turbine...... What do you say 50/50?

Thanks
Apache...................
10-18-2003 Over year old.
 
 
Frequency47
Veteran
Location: Port Ewen, NY

Stop Eating!

Guys I am spanked....., how many cases of chicken can you fit in a 28ft reefer?

776 cases too many if you ask me!

Mucho trevajo!!!!

I had the invite from Sar but, I will sacrifice tommorrow for a headache free day on Sunday. I am plankin' and spankin'.... I hope that I will be able to wease the controls away from AJT (the band is getting tuned up) after a while. I corrected the probs and hope to get it up in the air! I just hope the plugs (1-L) and exaust gasket arrive in the morning.

If the R30 is ready, Kudos! I just wish I was there to help....

Thanks Sar and Manzer.

CEO Sub-Terrainian Aircraft Development Corp.
10-18-2003 Over year old.
 
 
Barbary
Veteran
Location: new york

rob and i will be up in new paltz on sunday.... what time? ed, what's the street value of a 28-ft reefer?
10-18-2003 Over year old.
 
 
398 pages [ <<    <     6      7     ( 8 )     9      10     NEXT    >> ]162115 viewsPOST REPLY
Ron’s HeliProz South . Century Helicopter . MTA Hobbies

.
.
Clubs and Associations > orange county, ny ??
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Friday, September 5 - 6:28 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie