Twobeers
Key Veteran
Location: Toronto, Canada
| Try this.Go to edit radio, then servo settings.
At the top of the page select servo 1.
Now go to the bottom right and change the expo setting for low rates to 90%, change the expo setting for high rates to 80%.
Go back to the top and select servo (channel) 2.
Repeat the expo settings.
Go back to the top and select servo 4.
Repeat the settings.
Now go to the gyro page/bottom part of the page.
Select Heading Hold Gyro.
Change the switch selection to "Always On."
I am certain your gonna like this.
* One very important note here. I own a Futaba 8UHFS & I am very familiar with it, if you want to do this with your radio you would enter a negative value for the expo, both up and down for channels 1,2 & 4 this will make the sticks less sensitive near their center positions.
I am not familiar with the JR radio's so maybe someone else can add to this. |
