xcellgasman101
Elite Veteran
Location: WOODWARD, OKLA....
| Hey bharkin, Well you know that it has something to do with the tail, I have crashed my Raptor 60 4 times now from the tail turning loose, The frist two were from the brass insert letting go from the plastic yoke, that third crash was the plastic yoke broke, and the fourth crash was from the torque tube broke just in front of the spline insert, I have had nothing but hell with the Raptor tail system, You will need to look everything over really good, it is not likely that the push rod came off, try to put it back on and pull it off, It if is hard to do either way then thats not you problum, I'll will be willing to bet that something went wrong with the tail system itself, brass insert, yoke, did it break the tail up or is it complete??? Just my thought on the tail system's of the Raptor, it is the weakest link in the system....Or that is my own thoughts on the tail system of the raptor, With a driven tail, which the tail turns loose, then it really does'nt matter if you hit throuttle hold or not, because the tail is going to keep turnning untill the blades stop on inpact.....
John Crotts
www.soonerhelicamproductions.com |
