BIGRCR
Veteran
Location: Easley, South Carolina
| Yes the SE can be converted to a gasser with a kit. Call Tim at Miniature to find out what all you will need. 1-352-383-3201.
I know of:
-lower side frames. #105-12 @2 ea.
-gas lower frame rails. #105-86 and #105-88.
- front vertical tray #105-10 (needs to be drilled for mounting SE tray).
-different spacers spools between frames. #105-16 @4 ea.
-4 @ 12 mm spacers (go between SE servo tray and lower frames). (home made).
-rear motor mount.#105-58.
- Shroud Support plate and bolts #105-46N and #105-33 @4 ea.
- motor mount spacers. #105-91 @2.
-clutch and bell w/14 tooth pinion. #105-78 and #105-64.
-gas fan and hub assembly. #0579-5.
-fiberglass cooling shroud. #105-52N
and of course the G-23 or G-231 and muffler of your choice. Everything else will work fine, including the canopy.
I think Gordie Meade has a conversion he may part with. Look for GM on RunRyder.
Hope this helps!
BIGRCR- John Garst |
