RunRyder - remote glow starter

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 755 ONLINE 26 EVENTS SEARCH REGISTER START HERE

1 page

458 views

POST REPLY

Heli Wholesaler	.	3D Heli Depot	.	JR-Spektrum
	.		.

Beginners Corner > remote glow starter

Hollywood
Heliman
Location:

ok i have probaly yhe most stupid question out here but i bought 2 different remote glow adapters and i cant get neither of them to work. is there a trick to them that i am to stupid to figure out.....hehe? if i put the glow heater right on the glow plug it heats right up and turns red but is i try and use either of the adapters i get nothing> hope someone can help me out,

thanx
Mike

Raptor 30

02-21-2002 Over year old.

z11355
rrMaster
Location: 10000 is enough time wasted.

how about some information about how you connected them?

if the remote has one wire, then the wire goes to the plug but the
mounting bracket of the remote MUST be attached to the engine
(through a mounting bolt).

If the remote has two wires, then the second wire must contact the
engine somehow (mounting or even backplate).

02-21-2002 Over year old.

HOMEPAGE

stever
Heliman
Location: Eastern PA

loctite?

If you have the a single wire remote glow adaptor, do not use loctite on the screw that mounts the remote glow to the engine. Loctite does not conduct electricity.

02-21-2002 Over year old.

Hollywood
Heliman
Location:

mounting

i was trying to make sure it worked before mounting it, i take it it needs to be grounded to work then?

02-21-2002 Over year old.

z11355
rrMaster
Location: 10000 is enough time wasted.

yessiree.

basic electricity. it needs a complete circuit to work.

02-21-2002 Over year old.

HOMEPAGE

Hollywood
Heliman
Location:

works like a charm now

thanx and i do feel stupid now.....hehe. i was trying to test it before i mounted it. but appreciate the help thanx alot