rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 321 ONLINE 21 EVENTS SEARCH REGISTER  START HERE
 
1 page292 viewsPOST REPLY
JR-Spektrum . Gyro Hobbies . E-flite

.
.
Radio - Servo - Gyro - Gov - Batt > JR 10X and Dual rates
 
 
Jan Thore
Senior Heliman
Location: Bergen, Norway

I am trying to set up the dual rates for Elev.aile & rudder in Flight mode N on my 10 X , but this create a problem.
Actually nothing is happening at all. In flight mode 1 & 2 Auto D/R works
good. , but maunal swithing in Flight mode N is Not working. !!!!!!!!!!!!

Please give a good advice
P.S
I am using aux 3 for gyro control, with code 44 in auto mode with sensitivity acc. to flight mode.
02-20-2002 Over year old.
HOMEPAGE  
 
 
rickc
Elite Veteran
Location: Creve Coeur IL. (Peoria Area)

In normal flight mode the dual rates used are dependent on the 0 and 1 switch position for each of the applicable channels. When the stunt modes and the throttle hold switches are are activated, the rates are controlled by the auto dual rate function. Code 23, located in Section 8.8 of the manual.

Rick
02-20-2002 Over year old.
HOMEPAGE  
 
 
Jan Thore
Senior Heliman
Location: Bergen, Norway

Yes off course i have to switch the dual rate switch between 0- 1 pos for elevator and aileron.

But still it does not work. !!!!!!!!!!!!!!!!!!!
02-20-2002 Over year old.
HOMEPAGE  
 
 
rickc
Elite Veteran
Location: Creve Coeur IL. (Peoria Area)

If your flipping the duel rates switch and trying to get to where you change your percentages it doesn’t work that way. When in the duel rate menu are you using the SEL next to POS at the top of the screen to change the values on each switch setting? It's different than you would do on say and 8103 radios. I'm not 100% clear on what you’re asking. Quit using the!!!!!!!!!!!!! It makes me think your yelling. :-)

Rick
02-20-2002 Over year old.
HOMEPAGE  
 
 
Jan Thore
Senior Heliman
Location: Bergen, Norway

I just dicovered one important thing. When fliping the aux 3 swicth to the upper position the dual rates work as i expected. But why should this swich be in the upper position ?
In the lower position the dual rates does not work at all.

Is this Aux 3 switch controlling the gyro og master swich for dual rates ?

I am not yelling when ending my words with !!!!!!!!.
That means i am thinking hard.
02-20-2002 Over year old.
HOMEPAGE  
 
 
rickc
Elite Veteran
Location: Creve Coeur IL. (Peoria Area)

When you change the aux3 switch towards you to POS 1, then you will have to go into code 13 and touch the POS next to the SEL at the top of the screen to be able to set the duel rate value at POS 1 for the aux3 switch. this really is the same rule for each duel rate switch.

!!!!!!! :-)

Rick
02-20-2002 Over year old.
HOMEPAGE  
 
 
Jan Thore
Senior Heliman
Location: Bergen, Norway

I have now been cheking the dual rate properly ,but still is does not work as expected.

However a check this out In flight mode normal enter travel adjust code 11 , ( Code 44 should be set to INH ) Check the aux 3 travel limits.
When i change flight mode from N to 1 aux 3 travel limit is changing from upper to lower value ( -100 - +100 ) Aux 3 swicth is dead.

If i select flight mode 1 and than swicth Aux 3 than the aux 3 switch is working ( seen on Aux 3 travel adjustement )

From this i belive my radio is wrong connected .

Some good advice out there ?

Thanks you beforehand.
02-21-2002 Over year old.
HOMEPAGE  
 
 
1 page292 viewsPOST REPLY
Next D . Fast Lad Performance . Ace Hobby

.
.
Radio - Servo - Gyro - Gov - Batt > JR 10X and Dual rates
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Friday, December 5 - 11:09 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie