rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 324 ONLINE 21 EVENTS SEARCH REGISTER  START HERE
 
1 page664 viewsPOST REPLY
Modefo's RC Helicopters . XHELI.COM . Autography FlightPower

.
.
e-MS Composit Hornet > Setting Up A CP Brushless Hornet With A CSM HLG200 Gyro
 
 
Adam
Heliman
Location: Pacific Palisades, CA

Do you guys set it up with the standard 30mm tail pitch at neutral, or do you go with less pitch. ATVs don't work with the CSM like they do with my PG03, so the CSM wants to put out too much throw and I get binding if I start with 30mm at neutral. Thanks.
05-21-2003 Over year old.
 
 
Ed_R
Heliman
Location:

What servo are you using to run the tail? I've cooked pico std or two using the csm 200.
08-17-2003 Over year old.
 
 
hornet dave
Veteran
Location: Pittsburgh PA USA

From what i've been able to gather on some of the other bbs's, with the csm-200, you need to set the linkages so that the heli hovers with no trim or subtrim on the tail rotor while using a rate gyro. If you dont do this, the csm-200 will drift left or right.
08-20-2003 Over year old.
 
 
1 page664 viewsPOST REPLY
Advantage Hobby . Revolution Models . CarbonXtreme

.
.
e-MS Composit Hornet > Setting Up A CP Brushless Hornet With A CSM HLG200 Gyro
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Friday, December 5 - 11:08 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie