rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 414 ONLINE 25 EVENTS SEARCH REGISTER  START HERE
 
1 page170 viewsPOST REPLY
Model Rectifier Corp . RCHover . RC-Direct

.
.
e-Mikado Logo 400 500 600 > Servos do not align in frame
 
 
Qrrambero
Veteran
Location: San Francisco / Bay Area

I got the Logo 400 and I got 3 JR DS3517mg Servos for (Aile-Pitch & Elev)
Well, I have a problem these servos do not align with the hole in the Logo Frame. If I screw it in the top, I don't have a place to screw in the bottom .
Do I need special servos for it? This is the first time I use the small servos and in my 12 years flying helicopters I have used Futaba, Jr, Airtronics and never had a problem placing these servos in different helicopters.
Please advise.

Ae
10-29-2008 04:23 AM
 
 
Qrrambero
Veteran
Location: San Francisco / Bay Area

If someone cares. The Logo 400 works is designed to work with S9650 and Savox (No idea about this servos)SH1350.
Upset that Mikado does not let you know about it before you buy the heli. I know you can make another servo work in the frame, but I am not the type to make modification in the helicopter. That is one of the reason I bought a Trex 700, easy to put it together and everything fits.
I was told that the Futaba 9257 works in this helicopter.
I read that this servo is for the tail. Can I use it for the aile, elev and pitch?
Or is the 9650 the only option that I have?

Ae
10-30-2008 12:00 AM
 
 
Blackrat
Senior Heliman
Location: Peterborough UK

as far as i know you get two type's of logo 400 frames ... i presume you got the ones that take the 9650's , if thats the case then yes the 9257 will also fit as they are the same size as the 9650's
10-30-2008 12:15 AM
 
 
laughingstill
Elite Veteran
Location: Gainesville, Fl, USA

And almost the same price

3DMP-E, Logo 6003D, Logo103D Carbon and Trex 450se Flyin Firefighter
10-30-2008 12:32 AM
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

I run 9650s, they fit perfect and work real good to be honest.

...Once upon a time there were Nitros, flybars and frequency pins...
10-30-2008 03:01 AM
 
 
Qrrambero
Veteran
Location: San Francisco / Bay Area

reading the specifications for the 9257 is for the Gyro 401. Is that ok to use them for the cycling ? In the 90 helis isn't Ok, because the tail servo does not have to much torque.
Blackrat, there is another frame, but is for Hitec servos, those are smaller than the JR, and you need to remove part of the frame to make the hole larger for the JR servos.
I am learning about this mini servos and the Logo..

Ae
10-30-2008 04:45 AM
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

Ae, the 9257 are faster but under load they really are not as they lack the tourque, personally the 9650s are better I even ran 9650s in my Logo 14. I run the BL251 on tail btw, it fits good no modifications there necessary.

...Once upon a time there were Nitros, flybars and frequency pins...
10-30-2008 04:56 AM
 
 
1 page170 viewsPOST REPLY
HeliDirect . PowerHelis . Heli Wholesaler

.
.
e-Mikado Logo 400 500 600 > Servos do not align in frame
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, January 8 - 6:30 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie