RunRyder - CG of Logo 600 w 10S 5000 mah Battery

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 828 ONLINE 24 EVENTS SEARCH REGISTER START HERE

1 page

306 views

POST REPLY

Heli Wholesaler	.	3D Heli Depot	.	JR-Spektrum
	.		.

e-Mikado Logo 400 500 600 > CG of Logo 600 w 10S 5000 mah Battery

LJS
Veteran
Location: Minnesota, USA

Hi All,

I'm curious how the Logo 600 3D w VBar will balance with an Outrage 10S 5000 mah battery. I was just reading that a proper CG is very important with VBar.

Is there enough room to move the battery around to get the CG dead on?

Thanks.

Keep 'em flying.

LJS

600E, 1910 1Y, 8S FP4270, GY611
600N, OS50 Hyper, GY611
Logo 5003D, 600+, 6S TP 5000, DS760

10-21-2008 06:49 PM

HeliCSR
Senior Heliman
Location: Hesperia, Ca, US

Battery

I see a lot of people with that setup.

That should balance, I dont have a logo 600, I have a logo 20,
which is about equal in size to a logo 600.

I have tried batterys that were 4 ounces more than normal
and motors with 1/2 pound differance.

I did not have to mess with balance at all.

So you should be able to slide your battery forward or backward a little to make perfect balance.

I fly and then I fly some more.

10-21-2008 08:17 PM

HOMEPAGE

firechicken
Heliman
Location: ma

the 5000 mAh pack should be perfect! There is plenty of room in the 600 frames to get the CG spot on.

10-21-2008 09:01 PM

RCHeliDude23
New Heliman
Location: Calgary - Canada

I'm using the 4,200 mah pack and needed to add 200g to the front to get it to balance... the 5,000 would probably work better for a balanced CG.

10-21-2008 09:08 PM

helicraze
Key Veteran
Location: Victoria - Australia

I use the 4200MAH pack you don't need any extra weight, just slide it forward slightly and its perfect.

Logo 700 X 2

10-22-2008 02:25 AM

OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

5000 will work fine, I have ran packs that are 1300 grams, no issue in cg and no issue in it fealing heavy either really.

...Once upon a time there were Nitros, flybars and frequency pins...

10-22-2008 02:51 AM

MrMel
Elite Veteran
Location: Lidingo, Sweden

Quote
5000 will work fine, I have ran packs that are 1300 grams, no issue in cg and no issue in it fealing heavy either really.

I run 25C/4500 packs with heavy motor (4035) and it giving me serious nose-heavy CoG (using CF boom dont help).

I bought a tail-boom-servo-mount (QuickUK) for Raptor 90, that did the trick for me.

Team Autopartner - Team pilot

10-22-2008 03:24 AM

herbalist
Heliman
Location: Taipei, Taiwan

will kongpower 10S 5000 too heavy for logo600?

10-27-2008 06:25 AM

OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

Weight wise not likely to heavy, key is length, it should be a shorter pack at that weight range, say the length of a FP 5350mah Evolite pack.

...Once upon a time there were Nitros, flybars and frequency pins...

10-27-2008 06:51 AM

1 page

306 views

POST REPLY

Gyro Hobbies	.	E-flite	.	Next D
	.		.

e-Mikado Logo 400 500 600 > CG of Logo 600 w 10S 5000 mah Battery

PRINT TOPIC

Advertisers

Subscribe to This Topic