rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 648 ONLINE 25 EVENTS SEARCH REGISTER  START HERE
 
1 page235 viewsPOST REPLY
Modefo's RC Helicopters . XHELI.COM . Autography FlightPower

.
.
JR Heli Vibe - Airskipper - Sylphide - Venture > Vibe 50 engine/clutch alignment
 
 
u77171
Senior Heliman
Location: NY - USA

I was just wondering what method people were using to align the engine and clutch bell on the vibe 50? When I initially built it I just made sure that the bottom of the clutch lined up with the bottom of the bell. This was mostly visual so I would like a better way.
09-23-2008 07:09 PM
 
 
BarracudaHockey
rrMaster
Location: Orange Park FL

I spin the start shaft backwards with my fingers as I nip up the bolts. If you feel any resistance then back off that bolt and move to the next one. It takes a few minutes but I didn't have any aligment issues when I built and just rebuilt mine (replaced the frames)


AMA 77227
http://www.jaxrc.com
09-23-2008 09:15 PM
 
 
3Dx
Key Veteran
Location: Monterrey NL Mexico!

Try this:


http://www.runryder.com/helicopter/t442292p1/

Regards,
09-23-2008 09:38 PM
 
 
1 page235 viewsPOST REPLY
Advantage Hobby . Revolution Models . CarbonXtreme

.
.
JR Heli Vibe - Airskipper - Sylphide - Venture > Vibe 50 engine/clutch alignment
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, January 8 - 4:50 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie