chopperben1
Senior Heliman
Location: Ottawa, Canada
| Guys,
Thanks for the help earlier today. Everything is working well, but one last question:
I am ready to go for my first flgiht with the v-bar, and I have checked the rudder, cyclics and pitch, and everything works well. However, when I tilt the heli side to side or forwards on my desk to check if the v-bar is working, the I can hear the servos buzzing a little so I know they are working, but the movements in the swash plate seem to be in the right direction (i.e. swash plate wants to stay level no mateer which direction you tilt the heli), BUT, the movement in the swash plate is almost impercetible. It really moves only a fraction of a fraction of an inch. Does this sounds right?...or should the swash tilt quite a bit when I tilt the heli?
Any giudance is greatly appreciated...I am anxious to get this thing in the air!
Thanks,
Ben |
