rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 679 ONLINE 25 EVENTS SEARCH REGISTER  START HERE
 
1 page177 viewsPOST REPLY
Ace Hobby . Esprit Model . Thunder Power RC

.
.
Flybarless Rotor Head Systems > Vbar ATV's
 
 
Madbob9
Heliman
Location: So Cal.

I know that all the atv's need to be a 100 but what about the swash mix.Since in most tx's the default is 60 does it need to be raised for the vbar's resolution.
09-19-2008 06:53 PM
 
 
Jag72
Elite Veteran
Location: 20 minutes south of Boston Mass...

Vbar radio setup...

when using a vbar you actually set the radio to (1 Servo) ...meaning NO MIXING....

the Vbar does all the mixing...so you won't even have the swash travel as an option...

I myself run my atv's in the 125% + range...
on vbar machines...
09-19-2008 06:56 PM
 
 
Fillmoe Slim
Senior Heliman
Location: Santa Rosa

Was wondering about ATVs as well. Read the vbar article in a past mag and it meantioned turning ATVs all the way up. When I set mine up I left all ATVs at the defaualt 100 in my DX7. Should I go ahead and raise it all the way up to 150? Also would I have to go back and do a full setup?
09-19-2008 08:10 PM
 
 
Jag72
Elite Veteran
Location: 20 minutes south of Boston Mass...

ATV's and Vbar

Raising the ATV's simply increases endpoint travel and cyclic speed w/vbar..

Like I said..I run about 125%-135% on my ATv's and run Ail/Elev speed in the low 50's or high 40's in the vbar program..

You would not need to "do the setup" again...if anything you might have to look at your "cyclic ring" settings again
09-19-2008 08:16 PM
 
 
Fillmoe Slim
Senior Heliman
Location: Santa Rosa

Thanks Jag!
09-20-2008 04:23 PM
 
 
1 page177 viewsPOST REPLY
Mikado Modellhubschrauber . GrandRC . CanoMod

.
.
Flybarless Rotor Head Systems > Vbar ATV's
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, January 8 - 4:31 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie