rcman
Veteran
Location: Logan, Utah
| Here is what I copied from their site if you can get to it
| Quote |
| Couldn't get a connection with the cable
Aus VStabi
Wechseln zu: Navigation, Suche
You can connect the VSatbi to your pc with the included serial cable. If your pc doesn't have an serial 9-pin connector, you may use the cable together with the also included usb<=>serial converter.
To figure out to wich com port the converter is connected for communication to VStabi you had to use the device manager.
There you will see some ports like "com and lpt". Here you will find a entry called "USB Serial Port" assigned to a com port. You had to chose this port number in the VStabi pc software. VStabi will remember this for the next time.
If you have direct serial connectors to your pc, use the assigned port number like com1 or com2.
Remember for right use VStabi needs a external power supply all the time. Please turn on your rx to get VStabi working.
Von "http://vstabi.de/wiki/index.php?tit..._the_cable";
|
| Quote |
| The port i need is not displayed at the pc
Aus VStabi
Wechseln zu: Navigation, Suche
Not all ports were displayed at the pc software by initial use. You can add ports at the top right of the selection window. You had only to type in the used port number e.g."COM45" and click on apply. Now the port will be displayed at the list for conncting.
Even at bluetooth connections there may be very high port numbers assigned from the bluetooth stack who had to be added manually.
Tip: To speed up starting the soft, you can delete unused com ports at the list. VStabi won't check them now for connction while starting the programm.
Von "http://vstabi.de/wiki/index.php?tit..._at_the_pc";
|
David |
