TJinGuy
Elite Veteran
Location: Socorro, NM - USA
| Okay after an hour of tweaking the links and adjusting things, the Protos is flying MUCH better this morning. AND I got the Align gyro to work better. First all the tail links were too tight so a reaming fixed that right up. Next I moved the tail servo link out one hole. And finally I figured out that like all other piezo gyros, this one is quite temperature sensitive. I also found out that if you switch from HH mode to rate mode and then back again, it re-centers the gyro and it holds awesome. I mean I did some decent climbouts and it never moved AT ALL. I mean I have only seen one other heli do that and it was a 600n with a 401. Everything else I have seen, well besides the pros helis, move a little when hard collective changes are made.
This is me smiling finally 
- Chris
Variety+spice+life+supporting_paper_towel_industry=
King2+Rex450+Protos+Concept30 |
