rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 592 ONLINE 25 EVENTS SEARCH REGISTER  START HERE
 
1 page606 viewsPOST REPLY
GrandRC . CanoMod . Futaba-RC

.
.
e-E-Flite Blade CP mCX CX 400-3D > Blade 400 3D looking for someone who knows alot about the b400
 
 
helibro
Senior Heliman
Location: hamilton, ohio

im looking for someone that knows alot about the blade 400 and setting it up, so i dont have to flood the board with questions, looking for someone who doesnt mind me pm'ing them for set-up questions etc, thanks for the help.
09-10-2008 03:15 AM
 
 
Roscoe
Senior Heliman
Location: northfield,ohio - USA

Hey Bro,
You live about 4 hours away from me, I'd say come on out some weekend and I'd help you set it up, but that would be a long drive for you; offer's open tho.
What I do is use the search feature here, and on other site's; there's a ton of set-up, vid's and just plain good advice out there, it might take a little time to search and read thru, but in the long run, it will only help.

Safe Flying.

-------------------------------------------------------------------------------------------

Don't worry about avoiding temptation. As you grow older, it will avoid you.
09-10-2008 03:34 AM
 
 
tonyn
Senior Heliman
Location: orlando florida

I can help maybe whats up what do u need to know i have a pretty tricked out blade 400




Flying
09-10-2008 10:17 PM
 
 
neilg.
Heliman
Location: massachusetts

i'll ask a question: when throttle shut down on landing, the heli bangs. -3 0 +9. blade tracking spot on. throttle curve and pitch curve factory settings. how do you stop it?


how do you get more throttle at a lower stick position? just use trim?

reinstated with helifreak -- for now
09-27-2008 03:15 PM
 
 
totSandman
Senior Heliman
Location: Still Unkown

Ok I'm a little confused about the hole question .

But if you want more throttle at a lower stick position then just increase your throttle curve at the point where you want it at


If your using Norm curves the stock setting is
0-25-50-75-100 so try 0-35-50-75-100 you might find that you have to increase the other three point just a little to smooth the throttle out but that pretty much all you have to do .

Blade400 2221-8, DS285MG ,Spartan DS76,Jr3400G ,CC35 ESC ,CC10amp BEC/ T-Rex 500 lots of upgrades
09-27-2008 08:22 PM
 
 
1 page606 viewsPOST REPLY
A Main Hobbies . Boca Bearings . Modefo's RC Helicopters

.
.
e-E-Flite Blade CP mCX CX 400-3D > Blade 400 3D looking for someone who knows alot about the b400
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, January 8 - 5:17 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie