Gregor99 Elite Veteran Location: Western Wa
| Hilarious! The Raptor ate the King, burp!
Mike, here's the list of stuff that's coming toward the end of the week.
3 Batteries servo wire braid Tray for the gyro http://www.readyheli.com/RDLohr_s_T...gyro_mount2.htm Copper tape to ground the pulleys USB interface for the gyro Second set of Align CF blades (these are the new cheaper onces with a wood core. I'll start with these since they are heavier and cheaper than the kit CF blades. Step down for the rudder servo as I'm running the cyclic's at 6v
Adding the braided cover and routing the servo wires should go quickly. There's lots of room in frame and there are a few good routing options. I suspect that I'll be spending most of my time working on the gyro setup. With a USB interface and lots of options to configure, its a little more complex than my Logictech.
Canton MO backyard flying club West Coast Chapter |