rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 685 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
1 page418 viewsPOST REPLY
CanoMod . Futaba-RC . A Main Hobbies

.
.
Synergy R/C Synergy N9 > Neat 4mm flybar conversion trick.......
 
 
Droid
Elite Veteran
Location: Deep down in the Southwest- UK

.... not my idea just passing the info on.

You buy your Radix 710 blades and you get 5 to 4 mm bushes, who the hell needs those!!!

Well use them to reduce your flybar diameter to 4mm. Insert into flybar carrier mark through the set screw hole, remove and drill a hole through the bush to allow the setscrew to bite the 4mm flybar.

Job done and costs you nothing.........

Quotes may have been changed for my own amusement
08-23-2008 08:09 PM
 
 
Fastsrt
Senior Heliman
Location: Old Hickory, Tn.37138

Those spacers can also be used on the tail control rod. When you CA the threaded inserts in the carbon and install the ball links you have no good place to hold the rod while threading or adjusting the links. What you do is CA or expoy the bushings over the carbon rod at the end over the insert. Then you have somewhere to grip it with link pliers to hold it while adjusting them without splitting the carbon rod. Works well.

2 x Synergy N9's, T-Rex 700, 2 x Trex 600N, Vibe 50, Evo 90
08-23-2008 08:26 PM
 
 
Droid
Elite Veteran
Location: Deep down in the Southwest- UK

We better keep this thread quiet or they'll start charging for the bushes!!!

Quotes may have been changed for my own amusement
08-23-2008 09:05 PM
 
 
simpson
Veteran
Location: wolverhampton uk

how about the flybar seesaw..i know the bushes fit the carrier but do you bush the seesaw ?
cheers craig
08-23-2008 10:21 PM
HOMEPAGE  
 
 
Droid
Elite Veteran
Location: Deep down in the Southwest- UK

Yes insert into the seesaw also, one bush for each side.

Quotes may have been changed for my own amusement
08-23-2008 10:25 PM
 
 
simpson
Veteran
Location: wolverhampton uk

cheers mate..what does it do..converting to 4mm..besides more paddle choice
craig
08-23-2008 10:29 PM
HOMEPAGE  
 
 
Droid
Elite Veteran
Location: Deep down in the Southwest- UK

I'm hoping it will speed up the roll rate a little.... less mass in the flybar.

Quotes may have been changed for my own amusement
08-23-2008 10:33 PM
 
 
airboss
Elite Veteran
Location: OC ,california

I have tried the stubz 5mm and 4mm one each of my helis. they both fly the same.

OCRM....flyBlackstarr.org.
08-24-2008 01:44 AM
 
 
Fastsrt
Senior Heliman
Location: Old Hickory, Tn.37138

Quote 
cheers mate..what does it do..converting to 4mm..besides more paddle choice

That is exactly what is was designed for. Nothing has been mentioned about roll rate.

2 x Synergy N9's, T-Rex 700, 2 x Trex 600N, Vibe 50, Evo 90
08-25-2008 12:06 AM
 
 
Droid
Elite Veteran
Location: Deep down in the Southwest- UK

By reducing the flybar to 4mm you have reduced the volume by over 30% over its length. It must do more than offer wider paddle choice. Will find out soon enough.

Quotes may have been changed for my own amusement
08-25-2008 09:42 AM
 
 
Droid
Elite Veteran
Location: Deep down in the Southwest- UK

4mm conversion complete with 700N flybar and 4mm Stubz, who needs flybarless!!

Quotes may have been changed for my own amusement
08-30-2008 09:40 PM
 
 
1 page418 viewsPOST REPLY
Boca Bearings . Modefo's RC Helicopters . XHELI.COM

.
.
Synergy R/C Synergy N9 > Neat 4mm flybar conversion trick.......
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, November 22 - 4:29 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie