RunRyder - Logo 600 3d main blades - Page 1

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 692 ONLINE 20 EVENTS SEARCH REGISTER START HERE

1 page

204 views

Next D	.	Fast Lad Performance	.	Ace Hobby
	.		.

e-Mikado Logo 400 500 600 > Logo 600 3d main blades

KDFI
Senior Heliman
Location: Lodi, Ca- USA

I installed a set of V-blades on the L600. Is it uncommon to use only one blade spacer for each blade and grip? One fits quite snug, can't get two per blade grip in there. No spacers leaves too much of a gap.

Thanks

08-22-2008 04:43 AM

OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

One spacer on bottom or top of each side is what to do for certain. I run one spacer on bottom both sides with those blades and no issues to speak of, be well.

...Once upon a time there were Nitros, flybars and frequency pins...

08-22-2008 04:48 AM

KDFI
Senior Heliman
Location: Lodi, Ca- USA

thanks

08-22-2008 05:52 AM

MrMel
Elite Veteran
Location: Lidingo, Sweden

After 200 flights or so you will get the other in there

Team Autopartner - Team pilot

08-22-2008 03:10 PM

Jag72
Elite Veteran
Location: 20 minutes south of Boston Mass...

after 20 flights or less I'm usuallly replacing blades...

Man...I'd be lucky to get 20 flights on a set of blades MrMel...200 would be AMAZING...lol

08-22-2008 04:38 PM

MrMel
Elite Veteran
Location: Lidingo, Sweden

Its not the blades that open up, its the bladegrips, so 200 flights on a bladegrip isnt that hard

Team Autopartner - Team pilot

08-22-2008 04:42 PM

Klinger
Senior Heliman
Location: Brisbane Australia

You can squeeze 2 spacers in on new grips, just takes a bit of persistance and force, makes a very even blade grip.

08-22-2008 10:48 PM

1 page

204 views

Esprit Model	.	Thunder Power RC	.	Mikado Modellhubschrauber
	.		.

e-Mikado Logo 400 500 600 > Logo 600 3d main blades

Subscribe to This Topic

Saturday, November 22 - 4:34 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie