maveric4
Senior Heliman
Location: england
| Hi Chris,
Thanks for your reply,
That would suggest that mine is working ok and that there is nothing wrong with it if yours acts in a similar manor.
When interpreting the results of the read out at what point do you stop flying and recharge.
Would you stop when the pack reads 4.8 volt, and would that be with the initial reading it gives which would be higher anyway or the reading with the load applied, because my 2000 mah nicad sub C pack would read 4.8 volts after first flight of say 20 minutes when the load was applied.
Thanks again. |
