What is the difference between the 607FS and 617FS Rx?
Apart from the extra channel, is the main difference between the 7 and 8 channel Rx the fact that the 8 is 2048?
Proficient at turning cash and credit into smoke and noise!
08-08-2008 06:54 PM
cbflys Senior Heliman Location: Central Islip, Long Island NY - USA
The R607FS receiver outputs the channels in sequence. The R617FS groups the three cyclic channels together. Both these receivers are 10-bit (1024 steps of resolution).
The R608FS receiver is 11-bit, 2048 steps of resolution.
08-08-2008 09:48 PM
pgrbff Veteran Location: Louth, Ireland
So, forgive my ignorance, but I assume the 617 is preferable over the 607 if you are using eCCPM?
Proficient at turning cash and credit into smoke and noise!
08-08-2008 09:55 PM
cbflys Senior Heliman Location: Central Islip, Long Island NY - USA
Yep, you got it.
08-08-2008 09:58 PM
pgrbff Veteran Location: Louth, Ireland
Thanks
Proficient at turning cash and credit into smoke and noise!
08-08-2008 09:58 PM
frankg11 Veteran Location: Bellevue, WA
With a 14mz can't you re-sequence functions and channels to accomplish the same thing?
Channel 1 Aileron Channel 2 Elevator Channel 3 Pitch
Balance of the channels for the other stuff?
08-08-2008 10:20 PM
tgo Senior Heliman Location: HK
Yes, you can do that. But this is not a good idea. With the 7 channel mode, only channel 3 (i.e throttle) has failsafe setting !
Quote
With a 14mz can't you re-sequence functions and channels to accomplish the same thing?
08-09-2008 02:19 AM
frankg11 Veteran Location: Bellevue, WA
umm that's a good bit of trivia to know.
Thank you.
I guess I should RTFM more often.
08-11-2008 08:39 PM
andrewt1971 Heliman Location: Leeds, West Yorkshire, UK
But nothing stops you putting ail, ele, pitch on 4,5,6 and leaving the throttle on 3.
