rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 823 ONLINE 24 EVENTS SEARCH REGISTER  START HERE
 
1 page157 viewsPOST REPLY
Next D . Fast Lad Performance . Ace Hobby

.
.
Radio - Futaba FASST > No link between RX 5014 & Tx 12Z
 
 
IcemanCharlie
Heliman
Location: Jonstorp, Sweden

I've got a new 12Z and I CAN'T link the Rx & Tx!

I have tried both wireless and with the wire student-Rx

I have a 7V into the 5014 in the Bat and the cable from the 12Z into the Rx at pos 1.

I have tried with the hole cable extended ant the Tx parallel to the Rx but NO !!

I have tried to sent to my other NO G3 Rx and ok !!

What can I do to check it the Rx 5014 is broken !!??

Or maby I should say, how to get this to work !!??
08-01-2008 04:35 PM
 
 
steph280
Key Veteran
Location: Irvine, California

Make sure the transmitter is set to PCM G3, not the older PCM 1024 or PPM.
08-01-2008 04:45 PM
 
 
IcemanCharlie
Heliman
Location: Jonstorp, Sweden

Yezzz it's to that since 22 h ago

Mode A 5K !!!
08-01-2008 05:07 PM
 
 
MooneyDriver
Veteran
Location: Kent, Ohio

Make sure you hit the bonding button while the light on the RX is still red just after turning it on. Hold it down until the servos snap to attention...

Hey man, why does my lipo get bigger every time I charge it?
08-01-2008 05:13 PM
 
 
IcemanCharlie
Heliman
Location: Jonstorp, Sweden

Well..

The RED button in the Rx is just RED for less than 0.1 sec so...
08-01-2008 06:10 PM
 
 
MooneyDriver
Veteran
Location: Kent, Ohio

Yes, hold the button down when you see the red light. I think it takes about 15-20 seconds...
-Neil

Hey man, why does my lipo get bigger every time I charge it?
08-01-2008 06:27 PM
 
 
1 page157 viewsPOST REPLY
Esprit Model . Thunder Power RC . Mikado Modellhubschrauber

.
.
Radio - Futaba FASST > No link between RX 5014 & Tx 12Z
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, January 8 - 1:28 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie