RunRyder - HV 110 controller not arming

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 794 ONLINE 25 EVENTS SEARCH REGISTER START HERE

1 page

157 views

POST REPLY

Revolution Models	.	CarbonXtreme	.	Midland Helicopters
	.		.

e-Electric Motors & Controllers > HV 110 controller not arming

jmclay
Heliman
Location: Clovis, N.M. USA

HV 110 will not start motor. I have tried a servo in the throttle channel and rec.(AR7100) is working normally. I moved the ATV on the low end from 100 up to 125, then 150 nothing but a flashing red light continually 2 flashes per second on the controller. Using a DX7, tried rebinding, still not arming. When I plug in the 12s it counts then just continual red flashing. I have cut the red wire for there is no internal BEC, should I have left it uncut? Motor is Actro 32-3. So what's up?

07-30-2008 04:06 AM

Heli 770
Elite Veteran
Location: Lemon Grove, Ca. USA.

You don't cut that wire, No BEC in that HV110.

07-30-2008 04:14 AM

jmclay
Heliman
Location: Clovis, N.M. USA

The red wire is just voltage, not signal right? So would it really
matter if it were cut or not? Voltage to the rec. is by 7.4 lipo.

07-30-2008 04:22 AM

Heli 770
Elite Veteran
Location: Lemon Grove, Ca. USA.

The wires from the ESC to the Rx. Is to feed the the ESC.

07-30-2008 04:30 AM

Heli 770
Elite Veteran
Location: Lemon Grove, Ca. USA.

The ESC has a Dual opto isolators in it, the wires are to feed it, about .50ma.

It's to keep noise from the ESC to the Rx'

07-30-2008 04:34 AM

Heli 770
Elite Veteran
Location: Lemon Grove, Ca. USA.

You might be shutting down your Rx.

07-30-2008 04:47 AM

jmclay
Heliman
Location: Clovis, N.M. USA

I'll reconnect and see what happens tommorrow.
Thanks

07-30-2008 05:02 AM

Heli 770
Elite Veteran
Location: Lemon Grove, Ca. USA.

It was hard responding to you. You didn't answer my posts.

07-30-2008 05:06 AM

jmclay
Heliman
Location: Clovis, N.M. USA

Sorry I was out of pocket for a while, I do appreciate your info.

07-30-2008 05:20 AM

Heli 770
Elite Veteran
Location: Lemon Grove, Ca. USA.

If your Rx is on and you plug in your batt pack. that should make a lot of noise!

07-30-2008 05:22 AM

jmclay
Heliman
Location: Clovis, N.M. USA

There is only a loud pop! Voltage connecting, then count down to 12 beeps, then flashing red light.

07-30-2008 05:33 AM

Heli 770
Elite Veteran
Location: Lemon Grove, Ca. USA.

Are the ESC wires connected up again?

07-30-2008 05:44 AM

jmclay
Heliman
Location: Clovis, N.M. USA

Connected

Wires are together, It works thanks Heli 770!!!!!!!

07-30-2008 05:46 AM

Heli 770
Elite Veteran
Location: Lemon Grove, Ca. USA.

You can sleep tonight!

07-30-2008 05:48 AM

jmclay
Heliman
Location: Clovis, N.M. USA

You got that right, Thanks again!!!!!!!!!:

07-30-2008 05:51 AM

1 page

157 views

POST REPLY

HeliProz	.	ZoomsHobbies	.	HeliHobby
	.		.

e-Electric Motors & Controllers > HV 110 controller not arming

PRINT TOPIC

Advertisers

Subscribe to This Topic