rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 749 ONLINE 25 EVENTS SEARCH REGISTER  START HERE
 
1 page228 viewsPOST REPLY
Advantage Hobby . Revolution Models . CarbonXtreme

.
.
Synergy R/C Synergy N9 > Linkage Clearance?
 
 
LennyDude
Senior Heliman
Location: Maine USA

I am in the process of getting a N9 in the air and see that the center (elevator) servo ball end is hitting against the right hand servo ball end as they move.

I would think this is not a normal situation. Is there a secret you guys have to provide the clearance? Was thinking about raising the two outer servos a bit to make it happen but then the linkage will not be 100% straight.

Any help would be awesome

Lenny

Spinny UP, Gear DOWN, before U hit the GROUND
http://www.smrcha.net
07-30-2008 02:55 AM
HOMEPAGE  
 
 
airboss
Elite Veteran
Location: OC ,california

you only need to raise the ail servo a bit 1-2mm.and make sure you used the outer mount holes.

OCRM....flyBlackstarr.org.
07-30-2008 03:23 AM
 
 
LennyDude
Senior Heliman
Location: Maine USA

Thanks much..................

I will check things.

Spinny UP, Gear DOWN, before U hit the GROUND
http://www.smrcha.net
07-30-2008 03:33 AM
HOMEPAGE  
 
 
airboss
Elite Veteran
Location: OC ,california

make sure to size those links with the hypersizer tool.

OCRM....flyBlackstarr.org.
07-30-2008 04:32 AM
 
 
1 page228 viewsPOST REPLY
Midland Helicopters . HeliProz . ZoomsHobbies

.
.
Synergy R/C Synergy N9 > Linkage Clearance?
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, January 8 - 4:03 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie