rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 809 ONLINE 25 EVENTS SEARCH REGISTER  START HERE
 
1 page286 viewsPOST REPLY
Advantage Hobby . Revolution Models . CarbonXtreme

.
.
Synergy R/C Synergy N9 > next question : Durelite Batteries
 
 
ch-47c
Senior Heliman
Location: san jose, ca

My 4300 mah pack with a switched regulator has 2 leads that at least one has to go into reciever. I've read the instructions as to where it goes, and it does mention it anywhere.
Does the second lead plug into any open reciever channel that's not being used?
Right now I'm flying with it plugged with one lead.
07-28-2008 05:10 AM
 
 
ch-47c
Senior Heliman
Location: san jose, ca

Reciever`

Sorry, I lived in Germany fro most of my high school days and I get my ei and ie backwards in German and English.
I know some BB typing Nazi will point it out.
07-28-2008 05:12 AM
 
 
Freya_man101
Senior Heliman
Location: newport news VA

on my 4300 DL pack if im correct like mine..it has a black plug and a yellow plug...i pluged the black lead from the batt. to the reg. and from the reg to the reciver.... and the extra plug from the reg is my charge lead...the yellow plug i wraped and zip tied it,....and it works fine



hope this helps

-----Ricardo Maldonado----- Vibe 90---Vibe 50---Rave 450---
07-28-2008 05:26 AM
 
 
ch-47c
Senior Heliman
Location: san jose, ca

I use the yellow plug for charging and there are two black plugs out of the regulator that split from a Deans Ultra plug. I plug one of the black plugs into the reciever receptacle and the pix from Duralite don't show the second.
I'm wondering if it is a redundant plug to the reciever? I gues I could call Duralite.
Thanks Ricardo
07-28-2008 05:59 PM
 
 
frankg11
Veteran
Location: Bellevue, WA

Yellow == Charge
2 Black == 1 to receiver and 1 for tester.
07-28-2008 07:45 PM
 
 
ch-47c
Senior Heliman
Location: san jose, ca

frankg11,
Tester as in voltage tester with a 1 amp load? I have a switched regulator with a black plug at the switch used only for voltage testing as described in the instructions. The other two black plugs are from the regulator that split from a Deans Ultra plug. One is plugged into the receiver as per the picture in the instructions and no mention of the second black plug. is made.
07-29-2008 08:20 AM
 
 
Saleh
Veteran
Location: Kuwait

ch yes both of them go into the reciver pick any empty chanel and you can check the load from the lead that comes out of the switch

If you aint crashing you aint flyin
07-29-2008 12:54 PM
HOMEPAGE  
 
 
ch-47c
Senior Heliman
Location: san jose, ca

Saleh,
I called Durelite around 4:00 ET and couldn't go online prior. They were busy and took my name and number and said they would call back. I figured like most companies today they would call in 2 days or not at all. 30 minutes later a Tech Support guy named Jack said to plug it into a extra receiver port if one is available and don't worry if none available. It allows current to flow thru two 22gauge wires rather than one for less resistance. They thought to offer it asan option at first, but decided not and just make it standard for that setup.
Thanks again all.
07-29-2008 10:32 PM
 
 
1 page286 viewsPOST REPLY
Midland Helicopters . HeliProz . ZoomsHobbies

.
.
Synergy R/C Synergy N9 > next question : Durelite Batteries
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, January 8 - 2:55 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie