RunRyder - Taming it down?

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 733 ONLINE 25 EVENTS SEARCH REGISTER START HERE

1 page

347 views

POST REPLY

E-flite	.	Next D	.	Fast Lad Performance
	.		.

Synergy R/C Synergy N9 > Taming it down?

50feet
Key Veteran
Location: Wilmington, Delaware

I got my ship up to do some final adjustments and right off the bat I felt that this machine responds 100x faster than my Raptor..

I like a slower but agile feel. Would moving the ball on the seesaw in a hole from center numb it up a tiny bit?

To trust no one is to trust everyone equally

07-27-2008 08:32 PM

airborne r/c
Senior Heliman
Location: Woodward, Okla

Instead of adjusting the macnine try adjusting the EXPO in the TX. It will make the center stick a bit softer and when you go full stick up have all the speed and throw of your servos. I have a EXPO in mine set at 30%. This makes for very easy hovering and forward flight. when I flip or anything like that my servos return to full speed and I get that slower but agile feel your talking about.

Take offs are Optional, Landings are Mandatory

07-27-2008 11:08 PM

airboss
Elite Veteran
Location: OC ,california

airborn is right use expo,
my N9s fly smooth with 10% expo and 11 + - pitch

OCRM....flyBlackstarr.org.

07-28-2008 01:06 AM

Rymps
Veteran
Location: Indianapolis and Windsor CO

you can always use ATVs to bring down the responsive feel. You will need to run Expo around center. I run 30%. If you ship flips and rolls to fast for you can move the ATVs on the ALE and ELE to 95%. I would use a pitch gage and check your ALE and ELE pitch. (Make sure your collective is at Zero.) I think a raptor is 7-8 degrees. If your Synergy is 11 degrees i can see why you want to slow it down. I would set it to 9 degrees and try it there. If you use ATVs in the radio you can easy go back or add more at the feild to your likeing. Just my two cents.

07-28-2008 01:29 AM

50feet
Key Veteran
Location: Wilmington, Delaware

I did dial in some Expo

I usually don't use any more than 10 on any machine... I have about 30 in this to make it softer..

I was going to put it through the paces at the fun fly but I have to admit I was intimidated by it so I put it up and flew the raptor 50 and 90.

I like what I have seen so far. It feels like its 5lbs lighter in the air.

To trust no one is to trust everyone equally

07-28-2008 03:19 AM

airboss
Elite Veteran
Location: OC ,california

50 ,, list your set up for us maybe you got something wrong.

OCRM....flyBlackstarr.org.

07-28-2008 03:56 AM

Torkroll
Senior Heliman
Location: Bakersfield Ca

30 is ok.
You will get more used to the machine after 10 and 20 flights.
You then could go back to 10%. You could handle it.
It IS very responsive.

Anyone who says it's a small world never tried to walk to Zimbabwe.
Jerry

07-28-2008 05:28 AM

frankg11
Veteran
Location: Bellevue, WA

Also consider dropping head speed to 1750 or so. Both the Expo and slower head speed greatly improve the docility of the beast.

I run between 20-30 expo and 1750 on the head. Pitch and Cyclic are all maxed without binding.

The heli is much easier to fly like this. Need more action, ramp up the headspeed on Idleup3.

Good luck.

07-28-2008 07:47 PM

xxl
Senior Heliman
Location: The planet Earth

yep 30 is the number for me to it has a nice feel

07-29-2008 06:40 AM

1 page

347 views

POST REPLY

Ace Hobby	.	Esprit Model	.	Thunder Power RC
	.		.

Synergy R/C Synergy N9 > Taming it down?

PRINT TOPIC

Advertisers

Subscribe to This Topic