RunRyder - substitute for crank lock tool?

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 771 ONLINE 25 EVENTS SEARCH REGISTER START HERE

2 pages [ << < 1 ( 2 ) > >> ]

569 views

POST REPLY

Heli Wholesaler	.	3D Heli Depot	.	JR-Spektrum
	.		.

Audacity Models Pantera 50 - Tiger 50 > substitute for crank lock tool?

Learn to Fly
Key Veteran
Location: Yalesville Connecticut

Ill stick with the crank lock too, it is the BEST option out.

Uh how much have you spent so far? Your going to complain about 20 more bucks?

To get the job done without any issues? Seems like a no brainer to me.

Jeff
Believe nothing you hear, and half of what you see...

07-30-2008 12:47 PM

HOMEPAGE

Rennster
Veteran
Location: Hawaii

just ordered the tool and Readyheli stocked the gasket. Thanks for the advise

07-30-2008 02:38 PM

Rennster
Veteran
Location: Hawaii

did the oven trick but when I placed the refrigerated bearings into the engine the bearings both got stuck midway...I'll try the oven again.

08-08-2008 05:34 AM

Herc
Key Veteran
Location: Cranbrook, BC - Canada

When you say "refrigerated" bearings do you actually mean cooled from the fridge, or from a freezer?

I've always used the freezer to bring the bearings to the right temp. I've put the engine block in the oven for 10 mins at 300F (better yet just throw the block out into the Iraqi sun for 5 mins

) and the bearings in the freezer for the same time and they usually just drop right in. May depend on what the ambient air temp is though too? You may have to be quicker at putting the bearings in, or just leave the bearings in the freezer longer before putting the block in the oven?

You may have to experiment and try again like you're doing.

Shayne

Tiger & Pantera 50s
BRC Intrepid Gas
Predator Gas SE
Hirobo SST Eagle 2 98
Hughes 500D

08-08-2008 10:44 AM

HOMEPAGE

billm
Key Veteran
Location: Liberty Lake, WA

Let the bearings chill longer then the case in the oven. Once you tap the old bearings out. Put the case back in the oven for a few.
Sometimes you can bake cookies at the same time!
I have had good luck with this trick. I have all ceramic bearings in my Hypers.
A little trick is to use the crank shaft to "bump" the bearings home.

My name is Billm. Cough, and I'm a Heli Holic

08-09-2008 12:43 AM

Rennster
Veteran
Location: Hawaii

thanks finally got the bearings in. but when I went to our LHS guess what?! no nitro!!! and the last shipment was selling out at $40 per gallon!!!