HI,i have read a little about timing set up on here and not sure i understand what this is.can someone explain how to check and set it for me.this may be vital info that im missing in setup. thank you,
what goes up,must come down.
07-24-2008 06:53 PM
Heli 770 Elite Veteran Location: Lemon Grove, Ca. USA.
repodo2 We talking about ESC. timing for the motor?
07-24-2008 07:24 PM
repodu2 New Heliman Location: chesapeake,virginia
yes,im not sure how to adjust it,didnt know you could.i thought you just pluged it up and that was it.i did know you could turn the brake on and off,that was about it.
what goes up,must come down.
07-24-2008 07:28 PM
Heli 770 Elite Veteran Location: Lemon Grove, Ca. USA.
What ESC. and Motor?
07-24-2008 07:34 PM
repodu2 New Heliman Location: chesapeake,virginia
I know this is a bad thing,but i a blade 400 with the stock motor and esc,i also have a mx 400 with the same motor and esc.i have a blade cp belt conversion with the same set up.i have good luck e-flite products.i have been using them for a while now.
what goes up,must come down.
07-24-2008 07:43 PM
Heli 770 Elite Veteran Location: Lemon Grove, Ca. USA.
The only time you'll have worry about timing is, a programmable ESC.
07-24-2008 07:49 PM
repodu2 New Heliman Location: chesapeake,virginia
Thank you,i was thinking i might have been missing something,so the e-flight is plug and play so to speak.
what goes up,must come down.
07-24-2008 07:51 PM
Heli 770 Elite Veteran Location: Lemon Grove, Ca. USA.
